Client Profit

How to price lawn mowing so every yard pays

A short read · Updated November 2026

Mowing prices usually come from two places: what the guy down the street charges, and a number that felt right when you looked at the yard. Neither one knows what your crew costs you per hour, or how far that yard is from the last one on the route.

Here's a simple way to price recurring mowing from your own costs, and to spot the lawns on your route that don't pay.

1. Price the minutes, not the yard

A lawn job is short, so small amounts of time matter a lot. Start with how long your crew is actually on the property, start to finish, including blowing off the driveway and loading up. Then add the drive from the previous stop. On a 25 minute lawn, a 15 minute drive is more than a third of the paid time.

Paid hours per visit = crew size × (minutes on site + drive minutes) ÷ 60

2. Put a real number on fuel and wear

Gas, blades, trimmer line, belts and repairs are a per-visit cost even if you pay for them once a month. The simplest way to get a number: add up what you spent on all of that last season and divide by the number of visits you did. Use that in the calculator as the per-visit cost. We'll use $6 below.

3. Run three lawns through it

Two-person crew, $18 an hour, 14% on top for payroll taxes and workers comp, weekly mowing for about 30 weeks a year.

Small yard, closeSmall yard, farBig yard, close
Price per cut$45$45$95
On site / drive25 / 10 min25 / 25 min75 / 10 min
Profit per cut$13.75$3.49$28.10
Margin31%8%30%
Profit per paid hour$11.79$2.10$9.92
Profit per season$413$105$843
Price for 40% margin$52.43$70.40$112.33

The far small yard is the one to look at. It pays the same as the close one, but the extra 15 minutes of driving for two people takes it from about $12 an hour down to about $2. Over a season it makes $105. The big yard brings in twice the money per cut, but per paid hour it earns a bit less than the small close one.

Want to run your own numbers? The calculator does this for one lawn in about a minute.

Open the calculator

4. Set a minimum charge

Because the drive and the setup happen no matter how small the lawn is, a lot of operators set a minimum price per stop. Work it out from your shortest realistic visit plus a typical drive between stops, then run it through the calculator at your target margin. Anything under that number is losing money on time alone, even if the yard takes five minutes.

5. Check crew size on small lawns

A second person doubles the labor cost of every minute, including the drive. On big properties that pays for itself. On small ones it often doesn't. For example, if one person can do that small close yard in about 45 minutes instead of 25, the numbers come out to $18.88 a cut and $20.60 per paid hour, compared with $11.79 for the two-person crew. Your times will differ, so time a few of your own and run both versions.

6. Price for the season, not the week

A weekly lawn is roughly 30 cuts a year in most of the country, not 52. When you compare a lawn client to a cleaning or window client, or decide whether a lawn is worth keeping, look at the profit for the season. In the calculator, pick "Weekly in season" so the yearly numbers only count the cuts you actually do.

On Jobber? Drop three CSV exports on the free audit and see every recurring client ranked. Nothing is uploaded.

Run the free audit

More guides

Example numbers are made up to show the math. Plug in your own in the calculator.